Settings.System

Control whether the accelerometer will be used to change screen orientation. If 0, it will not be used unless explicitly requested by the application; if 1, it will be used by default unless explicitly disabled by the application.

Whether Airplane Mode is on.

A comma separated list of radios that need to be disabled when airplane mode is on. This overrides WIFI_ON and BLUETOOTH_ON, if Wi-Fi and bluetooth are included in the comma separated list.

Persistent store for the system-wide default alarm alert.

If 1, the activity manager will aggressively finish activities and processes as soon as they are no longer needed. If 0, the normal extended lifetime is used.

Appended to various volume related settings to record the previous values before they the settings were affected by a silent/vibrate ringer mode change.

Value to specify if the user prefers the date, time and time zone to be automatically fetched from the network (NITZ). 1=yes, 0=no

Determines whether remote devices may discover and/or connect to this device.

Type: INT

Bluetooth discoverability timeout. If this value is nonzero, then Bluetooth becomes discoverable for a certain number of seconds, after which is becomes simply connectable. The value is in seconds.

The content:// style URL for this table

Date format string mm/dd/yyyy dd/mm/yyyy yyyy/mm/dd

Name of an application package to be debugged.

A Uri that will point to the current default alarm alert at any given time.

A Uri that will point to the current default notification sound at any given time.

A Uri that will point to the current default ringtone at any given time.

If the current default ringtone is in the DRM provider and the caller does not have permission, the exception will be a FileNotFoundException.

Whether or not to dim the screen. 0=no 1=yes

Whether the audible DTMF tones are played by the dialer when dialing. The value is boolean (1 or 0).

What happens when the user presses the end call button if they're not on a call.
Values:
0 - The end button does nothing.
1 - The end button goes to the home screen.
2 - The end button puts the device to sleep and locks the keyguard.
3 - The end button goes to the home screen. If the user is already on the home screen, it puts the device to sleep.

Scaling factor for fonts, float.

Whether the haptic feedback (long presses, ...) are enabled. The value is boolean (1 or 0).

Ringer mode. This is used internally, changing this value will not change the ringer mode. See AudioManager.

Determines which streams are affected by ringer mode changes. The stream type's bit should be set to 1 if it should be muted when going into an inaudible ringer mode.

Determines which streams are affected by mute. The stream type's bit should be set to 1 if it should be muted when a mute request is received.

A formatted string of the next alarm that is set, or the empty string if there is no alarm set.

Persistent store for the system-wide default notification sound.

Constant for use in AIRPLANE_MODE_RADIOS to specify Bluetooth radio.

Constant for use in AIRPLANE_MODE_RADIOS to specify Cellular radio.

Constant for use in AIRPLANE_MODE_RADIOS to specify Wi-Fi radio.

Persistent store for the system-wide default ringtone URI.

If you need to play the default ringtone at any given time, it is recommended you give DEFAULT_RINGTONE_URI to the media player. It will resolve to the set default ringtone at the time of playing.

The screen backlight brightness between 0 and 255.

Control whether to enable automatic brightness mode.

SCREEN_BRIGHTNESS_MODE value for manual mode.

SCREEN_BRIGHTNESS_MODE value for manual mode.

The timeout before the screen turns off.

Whether the setup wizard has been run before (on first boot), or if it still needs to be run. nonzero = it has been run in the past 0 = it has not been run in the past

Control whether the process CPU usage meter should be shown.

Whether live web suggestions while the user types into search dialogs are enabled. Browsers and other search UIs should respect this, as it allows a user to avoid sending partial queries to a search engine, if it poses any privacy concern. The value is boolean (1 or 0).

Whether the sounds effects (key clicks, lid open ...) are enabled. The value is boolean (1 or 0).

Whether we keep the device on while the device is plugged in. Supported values are:

• 0 to never stay on while plugged in
• BATTERY_PLUGGED_AC to stay on for AC charger
• BATTERY_PLUGGED_USB to stay on for USB charger

Setting to enable Auto Caps in text editors. 1 = On, 0 = Off

Setting to enable Auto Punctuate in text editors. 1 = On, 0 = Off. This feature converts two spaces to a "." and space.

Setting to enable Auto Replace (AutoText) in text editors. 1 = On, 0 = Off

Setting to showing password characters in text editors. 1 = On, 0 = Off

Display times as 12 or 24 hours 12 24

Scaling factor for activity transition animations. Setting to 0 will disable window animations.

Whether vibrate is on for different events. This is used internally, changing this value will not change the vibrate. See AudioManager.

Alarm volume. This is used internally, changing this value will not change the volume. See AudioManager.

Bluetooth Headset volume. This is used internally, changing this value will not change the volume. See AudioManager.

Music/media/gaming volume. This is used internally, changing this value will not change the volume. See AudioManager.

Notification volume. This is used internally, changing this value will not change the volume. See AudioManager.

Ringer volume. This is used internally, changing this value will not change the volume. See AudioManager.

The mapping of stream type (integer) to its setting.

System/notifications volume. This is used internally, changing this value will not change the volume. See AudioManager.

Voice call volume. This is used internally, changing this value will not change the volume. See AudioManager.

If 1, when launching DEBUG_APP it will wait for the debugger before starting user code. If 0, it will run normally.

Name of activity to use for wallpaper on the home screen.

The policy for deciding when Wi-Fi should go to sleep (which will in turn switch to using the mobile data as an Internet connection).

Set to one of WIFI_SLEEP_POLICY_DEFAULT, WIFI_SLEEP_POLICY_NEVER_WHILE_PLUGGED, or WIFI_SLEEP_POLICY_NEVER.

Value for WIFI_SLEEP_POLICY to use the default Wi-Fi sleep policy, which is to sleep shortly after the turning off according to the STAY_ON_WHILE_PLUGGED_IN setting.

Value for WIFI_SLEEP_POLICY to never go to sleep.

Value for WIFI_SLEEP_POLICY to use the default policy when the device is on battery, and never go to sleep when the device is plugged in.

If using static IP, the primary DNS's IP address.

Example: "192.168.1.1"

If using static IP, the secondary DNS's IP address.

Example: "192.168.1.2"

If using static IP, the gateway's IP address.

Example: "192.168.1.1"

The static IP address.

Example: "192.168.1.51"

If using static IP, the net mask.

Example: "255.255.255.0"

Whether to use static IP and other static network attributes.

Set to 1 for true and 0 for false.

Scaling factor for normal window animations. Setting to 0 will disable window animations.

Convenience function to read all of the current configuration-related settings into a Configuration object.

Convenience function for retrieving a single system settings value as a floating point number. Note that internally setting values are always stored as strings; this function converts the string to an float for you. The default value will be returned if the setting is not defined or not a valid float.

Convenience function for retrieving a single system settings value as a float. Note that internally setting values are always stored as strings; this function converts the string to a float for you.

This version does not take a default value. If the setting has not been set, or the string value is not a number, it throws Settings.SettingNotFoundException.

Convenience function for retrieving a single system settings value as an integer. Note that internally setting values are always stored as strings; this function converts the string to an integer for you.

This version does not take a default value. If the setting has not been set, or the string value is not a number, it throws Settings.SettingNotFoundException.

Convenience function for retrieving a single system settings value as an integer. Note that internally setting values are always stored as strings; this function converts the string to an integer for you. The default value will be returned if the setting is not defined or not an integer.

Convenience function for retrieving a single system settings value as a long. Note that internally setting values are always stored as strings; this function converts the string to a long for you. The default value will be returned if the setting is not defined or not a long.

Convenience function for retrieving a single system settings value as a long. Note that internally setting values are always stored as strings; this function converts the string to a long for you.

This version does not take a default value. If the setting has not been set, or the string value is not a number, it throws Settings.SettingNotFoundException.

Look up a name in the database.

Construct the content URI for a particular name/value pair, useful for monitoring changes with a ContentObserver.

Convenience function to write a batch of configuration-related settings from a Configuration object.

Convenience function for updating a single settings value as a floating point number. This will either create a new entry in the table if the given name does not exist, or modify the value of the existing row with that name. Note that internally setting values are always stored as strings, so this function converts the given value to a string before storing it.

Convenience function for updating a single settings value as an integer. This will either create a new entry in the table if the given name does not exist, or modify the value of the existing row with that name. Note that internally setting values are always stored as strings, so this function converts the given value to a string before storing it.

Convenience function for updating a single settings value as a long integer. This will either create a new entry in the table if the given name does not exist, or modify the value of the existing row with that name. Note that internally setting values are always stored as strings, so this function converts the given value to a string before storing it.

Store a name/value pair into the database.