ACE  6.1.0
Public Types | Public Member Functions | Public Attributes | Protected Member Functions
ACE_SOCK_SEQPACK_Connector Class Reference

Defines a factory that actively connects to a remote IP address and TCP port, creating a new ACE_SOCK_SEQPACK_Association object. More...

#include <SOCK_SEQPACK_Connector.h>

List of all members.

Public Types

typedef ACE_Multihomed_INET_Addr PEER_ADDR
typedef
ACE_SOCK_SEQPACK_Association 
PEER_STREAM

Public Member Functions

 ACE_SOCK_SEQPACK_Connector (void)
 Default constructor.
 ACE_SOCK_SEQPACK_Connector (ACE_SOCK_SEQPACK_Association &new_association, const ACE_Addr &remote_sap, const ACE_Time_Value *timeout=0, const ACE_Addr &local_sap=ACE_Addr::sap_any, int reuse_addr=0, int flags=0, int perms=0, int protocol=132)
 ACE_SOCK_SEQPACK_Connector (ACE_SOCK_SEQPACK_Association &new_association, const ACE_Addr &remote_sap, const ACE_Time_Value *timeout, const ACE_Multihomed_INET_Addr &local_sap, int reuse_addr=0, int flags=0, int perms=0, int protocol=132)
int connect (ACE_SOCK_SEQPACK_Association &new_association, const ACE_Addr &remote_sap, const ACE_Time_Value *timeout=0, const ACE_Addr &local_sap=ACE_Addr::sap_any, int reuse_addr=0, int flags=0, int perms=0, int protocol=132)
int connect (ACE_SOCK_SEQPACK_Association &new_association, const ACE_Addr &remote_sap, const ACE_Time_Value *timeout, const ACE_Multihomed_INET_Addr &local_sap, int reuse_addr=0, int flags=0, int perms=0, int protocol=132)
 ~ACE_SOCK_SEQPACK_Connector (void)
 Default dtor.
int complete (ACE_SOCK_SEQPACK_Association &new_association, ACE_Addr *remote_sap=0, const ACE_Time_Value *timeout=0)
bool reset_new_handle (ACE_HANDLE handle)
 Resets any event associations on this handle.
void dump (void) const
 Dump the state of an object.

Public Attributes

 ACE_ALLOC_HOOK_DECLARE
 Declare the dynamic allocation hooks.

Protected Member Functions

int shared_open (ACE_SOCK_SEQPACK_Association &new_association, int protocol_family, int protocol, int reuse_addr)
int shared_open (ACE_SOCK_SEQPACK_Association &new_association, int protocol_family, int protocol, ACE_Protocol_Info *protocolinfo, ACE_SOCK_GROUP g, u_long flags, int reuse_addr)
int shared_connect_start (ACE_SOCK_SEQPACK_Association &new_association, const ACE_Time_Value *timeout, const ACE_Addr &local_sap)
 Perform operations that must be called before <ACE_OS::connect>.
int shared_connect_start (ACE_SOCK_SEQPACK_Association &new_association, const ACE_Time_Value *timeout, const ACE_Multihomed_INET_Addr &local_sap)
int shared_connect_finish (ACE_SOCK_SEQPACK_Association &new_association, const ACE_Time_Value *timeout, int result)
 Perform operations that must be called after <ACE_OS::connect>.

Detailed Description

Defines a factory that actively connects to a remote IP address and TCP port, creating a new ACE_SOCK_SEQPACK_Association object.

The ACE_SOCK_SEQPACK_Connector doesn't have a socket of its own, i.e., it simply "borrows" the one from the ACE_SOCK_SEQPACK_Association that's being connected. The reason for this is that the underlying socket API doesn't use a factory socket to connect data mode sockets. Therefore, there's no need to inherit ACE_SOCK_SEQPACK_Connector from ACE_SOCK. A nice side-effect of this is that ACE_SOCK_SEQPACK_Connector objects do not store state so they can be used reentrantly in multithreaded programs.


Member Typedef Documentation


Constructor & Destructor Documentation

ACE_SOCK_SEQPACK_Connector::ACE_SOCK_SEQPACK_Connector ( void  ) [inline]

Default constructor.

ACE_SOCK_SEQPACK_Connector::ACE_SOCK_SEQPACK_Connector ( ACE_SOCK_SEQPACK_Association new_association,
const ACE_Addr remote_sap,
const ACE_Time_Value timeout = 0,
const ACE_Addr local_sap = ACE_Addr::sap_any,
int  reuse_addr = 0,
int  flags = 0,
int  perms = 0,
int  protocol = 132 
)

Actively connect to a peer, producing a connected ACE_SOCK_SEQPACK_Association object if the connection succeeds.

Parameters:
new_associationThe ACE_SOCK_SEQPACK_Association object that will be connected to the peer.
remote_sapThe address that we are trying to connect to. The protocol family of remote_sap is used for the connected socket. That is, if remote_sap contains an IPv6 address, a socket with family PF_INET6 will be used, else it will be PF_INET.
timeoutPointer to an ACE_Time_Value object with amount of time to wait to connect. If the pointer is 0 then the call blocks until the connection attempt is complete, whether it succeeds or fails. If *timeout == {0, 0} then the connection is done using nonblocking mode. In this case, if the connection can't be made immediately, this method returns -1 and errno == EWOULDBLOCK. If *timeout > {0, 0} then this is the maximum amount of time to wait before timing out; if the specified amount of time passes before the connection is made, this method returns -1 and errno == ETIME. Note the difference between this case and when a blocking connect is attempted that TCP times out - in the latter case, errno will be ETIMEDOUT.
local_sap(optional) The local address to bind to. If it's the default value of ACE_Addr::sap_any then the OS will choose an unused port.
reuse_addr(optional) If the value is 1, the local address (local_sap) is reused, even if it hasn't been cleaned up yet.
flagsIgnored.
permsIgnored.
protocol(optional) If value is 0, default SOCK_STREAM protocol is selected by kernel (typically TCP).
Returns:
Returns 0 if the connection succeeds. If it fails, -1 is returned and errno contains a specific error code.
ACE_SOCK_SEQPACK_Connector::ACE_SOCK_SEQPACK_Connector ( ACE_SOCK_SEQPACK_Association new_association,
const ACE_Addr remote_sap,
const ACE_Time_Value timeout,
const ACE_Multihomed_INET_Addr local_sap,
int  reuse_addr = 0,
int  flags = 0,
int  perms = 0,
int  protocol = 132 
)

Actively connect to a peer, producing a connected ACE_SOCK_SEQPACK_Association object if the connection succeeds.

Parameters:
new_associationThe ACE_SOCK_SEQPACK_Association object that will be connected to the peer.
remote_sapThe address that we are trying to connect to. The protocol family of remote_sap is used for the connected socket. That is, if remote_sap contains an IPv6 address, a socket with family PF_INET6 will be used, else it will be PF_INET.
timeoutPointer to an ACE_Time_Value object with amount of time to wait to connect. If the pointer is 0 then the call blocks until the connection attempt is complete, whether it succeeds or fails. If *timeout == {0, 0} then the connection is done using nonblocking mode. In this case, if the connection can't be made immediately, this method returns -1 and errno == EWOULDBLOCK. If *timeout > {0, 0} then this is the maximum amount of time to wait before timing out; if the specified amount of time passes before the connection is made, this method returns -1 and errno == ETIME. Note the difference between this case and when a blocking connect is attempted that TCP times out - in the latter case, errno will be ETIMEDOUT.
local_sap(optional) The set of local addresses for SCTP to bind to.
reuse_addr(optional) If the value is 1, the local address (local_sap) is reused, even if it hasn't been cleaned up yet.
flagsIgnored.
permsIgnored.
protocol(optional) If value is 0, default SOCK_STREAM protocol is selected by kernel (typically TCP).
Returns:
Returns 0 if the connection succeeds. If it fails, -1 is returned and errno contains a specific error code.
ACE_SOCK_SEQPACK_Connector::~ACE_SOCK_SEQPACK_Connector ( void  ) [inline]

Default dtor.


Member Function Documentation

int ACE_SOCK_SEQPACK_Connector::complete ( ACE_SOCK_SEQPACK_Association new_association,
ACE_Addr remote_sap = 0,
const ACE_Time_Value timeout = 0 
)

Try to complete a nonblocking connection that was begun by a previous call to connect with a {0, 0} ACE_Time_Value timeout.

See also:
connect().
Parameters:
new_associationThe ACE_SOCK_SEQPACK_Association object that will be connected to the peer.
remote_sapIf non-0, it points to the ACE_INET_Addr object that will contain the address of the connected peer.
timeoutSame values and return value possibilites as for connect().
See also:
connect().
int ACE_SOCK_SEQPACK_Connector::connect ( ACE_SOCK_SEQPACK_Association new_association,
const ACE_Addr remote_sap,
const ACE_Time_Value timeout = 0,
const ACE_Addr local_sap = ACE_Addr::sap_any,
int  reuse_addr = 0,
int  flags = 0,
int  perms = 0,
int  protocol = 132 
)

Actively connect to a peer, producing a connected ACE_SOCK_SEQPACK_Association object if the connection succeeds.

Parameters:
new_associationThe ACE_SOCK_SEQPACK_Association object that will be connected to the peer.
remote_sapThe address that we are trying to connect to. The protocol family of remote_sap is used for the connected socket. That is, if remote_sap contains an IPv6 address, a socket with family PF_INET6 will be used, else it will be PF_INET.
timeoutPointer to an ACE_Time_Value object with amount of time to wait to connect. If the pointer is 0 then the call blocks until the connection attempt is complete, whether it succeeds or fails. If *timeout == {0, 0} then the connection is done using nonblocking mode. In this case, if the connection can't be made immediately, this method returns -1 and errno == EWOULDBLOCK. If *timeout > {0, 0} then this is the maximum amount of time to wait before timing out; if the specified amount of time passes before the connection is made, this method returns -1 and errno == ETIME. Note the difference between this case and when a blocking connect is attempted that TCP times out - in the latter case, errno will be ETIMEDOUT.
local_sap(optional) The local address to bind to. If it's the default value of ACE_Addr::sap_any then the OS will choose an unused port.
reuse_addr(optional) If the value is 1, the local address (local_sap) is reused, even if it hasn't been cleaned up yet.
flagsIgnored.
permsIgnored.
protocol(optional) If value is 0, default SOCK_STREAM protocol is selected by kernel (typically TCP).
Returns:
Returns 0 if the connection succeeds. If it fails, -1 is returned and errno contains a specific error code.
int ACE_SOCK_SEQPACK_Connector::connect ( ACE_SOCK_SEQPACK_Association new_association,
const ACE_Addr remote_sap,
const ACE_Time_Value timeout,
const ACE_Multihomed_INET_Addr local_sap,
int  reuse_addr = 0,
int  flags = 0,
int  perms = 0,
int  protocol = 132 
)

Actively connect to a peer, producing a connected ACE_SOCK_SEQPACK_Association object if the connection succeeds.

Parameters:
new_associationThe ACE_SOCK_SEQPACK_Association object that will be connected to the peer.
remote_sapThe address that we are trying to connect to. The protocol family of remote_sap is used for the connected socket. That is, if remote_sap contains an IPv6 address, a socket with family PF_INET6 will be used, else it will be PF_INET.
timeoutPointer to an ACE_Time_Value object with amount of time to wait to connect. If the pointer is 0 then the call blocks until the connection attempt is complete, whether it succeeds or fails. If *timeout == {0, 0} then the connection is done using nonblocking mode. In this case, if the connection can't be made immediately, this method returns -1 and errno == EWOULDBLOCK. If *timeout > {0, 0} then this is the maximum amount of time to wait before timing out; if the specified amount of time passes before the connection is made, this method returns -1 and errno == ETIME. Note the difference between this case and when a blocking connect is attempted that TCP times out - in the latter case, errno will be ETIMEDOUT.
local_sap(optional) The set of local addresses for SCTP to bind to.
reuse_addr(optional) If the value is 1, the local address (local_sap) is reused, even if it hasn't been cleaned up yet.
flagsIgnored.
permsIgnored.
protocol(optional) If value is 0, default SOCK_STREAM protocol is selected by kernel (typically TCP).
Returns:
Returns 0 if the connection succeeds. If it fails, -1 is returned and errno contains a specific error code.
void ACE_SOCK_SEQPACK_Connector::dump ( void  ) const

Dump the state of an object.

bool ACE_SOCK_SEQPACK_Connector::reset_new_handle ( ACE_HANDLE  handle) [inline]

Resets any event associations on this handle.

int ACE_SOCK_SEQPACK_Connector::shared_connect_finish ( ACE_SOCK_SEQPACK_Association new_association,
const ACE_Time_Value timeout,
int  result 
) [protected]

Perform operations that must be called after <ACE_OS::connect>.

int ACE_SOCK_SEQPACK_Connector::shared_connect_start ( ACE_SOCK_SEQPACK_Association new_association,
const ACE_Time_Value timeout,
const ACE_Addr local_sap 
) [protected]

Perform operations that must be called before <ACE_OS::connect>.

int ACE_SOCK_SEQPACK_Connector::shared_connect_start ( ACE_SOCK_SEQPACK_Association new_association,
const ACE_Time_Value timeout,
const ACE_Multihomed_INET_Addr local_sap 
) [protected]
int ACE_SOCK_SEQPACK_Connector::shared_open ( ACE_SOCK_SEQPACK_Association new_association,
int  protocol_family,
int  protocol,
int  reuse_addr 
) [protected]

Perform operations that ensure the socket is opened using BSD-style semantics (no QoS).

int ACE_SOCK_SEQPACK_Connector::shared_open ( ACE_SOCK_SEQPACK_Association new_association,
int  protocol_family,
int  protocol,
ACE_Protocol_Info protocolinfo,
ACE_SOCK_GROUP  g,
u_long  flags,
int  reuse_addr 
) [protected]

Perform operations that ensure the socket is opened using QoS-enabled semantics.


Member Data Documentation

Declare the dynamic allocation hooks.


The documentation for this class was generated from the following files:
 All Classes Namespaces Files Functions Variables Typedefs Enumerations Enumerator Friends Defines