Variables | |
| * | $Id |
| do something like the | following |
| do something like the the work being done by the ACE Configuration Project is being slowly introduced into the official ACE distribution Some of the functionality in the work created by the ACE Configuration Project has been removed so that ACE may be built in the usual fashion Once the ACE Configuration Project work stabilizes on more platforms that removed functionality may be added to ACE Currently the configure script contains most of the tests that are necessary to properly configure ACE on most platforms | However |
| do something like the the work being done by the ACE Configuration Project is being slowly introduced into the official ACE distribution Some of the functionality in the work created by the ACE Configuration Project has been removed so that ACE may be built in the usual fashion Once the ACE Configuration Project work stabilizes on more platforms that removed functionality may be added to ACE Currently the configure script contains most of the tests that are necessary to properly configure ACE on most platforms there are still some autoconf tests that are missing As | such |
| do something like the the work being done by the ACE Configuration Project is being slowly introduced into the official ACE distribution Some of the functionality in the work created by the ACE Configuration Project has been removed so that ACE may be built in the usual fashion Once the ACE Configuration Project work stabilizes on more platforms that removed functionality may be added to ACE Currently the configure script contains most of the tests that are necessary to properly configure ACE on most platforms there are still some autoconf tests that are missing As you may encounter and most likely will have compilation problems Please report any problems to the contacts listed at the end of this document The configure script that is currently being used has been modified from the ACE Configuration Project s configure script to prevent makefiles from being automatically generated since there are still some issues that must be addressed before automatically generated makefiles are incorporated into the official ACE distribution A listing of available configure script options can be shown by | entering |
| do something like the the work being done by the ACE Configuration Project is being slowly introduced into the official ACE distribution Some of the functionality in the work created by the ACE Configuration Project has been removed so that ACE may be built in the usual fashion Once the ACE Configuration Project work stabilizes on more platforms that removed functionality may be added to ACE Currently the configure script contains most of the tests that are necessary to properly configure ACE on most platforms there are still some autoconf tests that are missing As you may encounter and most likely will have compilation problems Please report any problems to the contacts listed at the end of this document The configure script that is currently being used has been modified from the ACE Configuration Project s configure script to prevent makefiles from being automatically generated since there are still some issues that must be addressed before automatically generated makefiles are incorporated into the official ACE distribution A listing of available configure script options can be shown by silent do not print checking messages version print the version of autoconf that created configure Directory and file | names |
| do something like the the work being done by the ACE Configuration Project is being slowly introduced into the official ACE distribution Some of the functionality in the work created by the ACE Configuration Project has been removed so that ACE may be built in the usual fashion Once the ACE Configuration Project work stabilizes on more platforms that removed functionality may be added to ACE Currently the configure script contains most of the tests that are necessary to properly configure ACE on most platforms there are still some autoconf tests that are missing As you may encounter and most likely will have compilation problems Please report any problems to the contacts listed at the end of this document The configure script that is currently being used has been modified from the ACE Configuration Project s configure script to prevent makefiles from being automatically generated since there are still some issues that must be addressed before automatically generated makefiles are incorporated into the official ACE distribution A listing of available configure script options can be shown by silent do not print checking messages version print the version of autoconf that created configure Directory and file e g Sun C[default=no] enable enable code inlining[default=yes] enable log msg prop enable threads inheriting ACE_Log_Msg properties from parent thread[default=yes] enable logging enable ACE logging macros[default=yes] enable malloc stats enable malloc statistics collection[default=no] enable optimize enable additional optimizations[default=yes] enable probe enable ACE_Timeprobes[default=no] enable profile enable profiling[default=no] enable purify Purify all executables[default=no] enable quantify Quantify all executables[default=no] enable reentrant enable reentrant functions[default=yes] enable repo use GNU template repository GNU C with repo patches and EGCS only[default=no] enable rtti enable run time type identification *Currently only for Sun C[default=no] enable static obj mgr static enable Object_Manager[default=yes] enable threads enable thread support[default=yes] enable verb not sup enable verbose ENOTSUP reports[default=no] enable trace enable ACE tracing[default=no] enable xt reactor build support for the XtReactor[default=no] with x use the X Window System with gperf compile the gperf program[default=yes] with tli device[=DEV] device for TCP on TLI[default=/dev/tcp] To enable debugging and disable code | inlining |
| do something like the the work being done by the ACE Configuration Project is being slowly introduced into the official ACE distribution Some of the functionality in the work created by the ACE Configuration Project has been removed so that ACE may be built in the usual fashion Once the ACE Configuration Project work stabilizes on more platforms that removed functionality may be added to ACE Currently the configure script contains most of the tests that are necessary to properly configure ACE on most platforms there are still some autoconf tests that are missing As you may encounter and most likely will have compilation problems Please report any problems to the contacts listed at the end of this document The configure script that is currently being used has been modified from the ACE Configuration Project s configure script to prevent makefiles from being automatically generated since there are still some issues that must be addressed before automatically generated makefiles are incorporated into the official ACE distribution A listing of available configure script options can be shown by silent do not print checking messages version print the version of autoconf that created configure Directory and file e g Sun C[default=no] enable enable code inlining[default=yes] enable log msg prop enable threads inheriting ACE_Log_Msg properties from parent thread[default=yes] enable logging enable ACE logging macros[default=yes] enable malloc stats enable malloc statistics collection[default=no] enable optimize enable additional optimizations[default=yes] enable probe enable ACE_Timeprobes[default=no] enable profile enable profiling[default=no] enable purify Purify all executables[default=no] enable quantify Quantify all executables[default=no] enable reentrant enable reentrant functions[default=yes] enable repo use GNU template repository GNU C with repo patches and EGCS only[default=no] enable rtti enable run time type identification *Currently only for Sun C[default=no] enable static obj mgr static enable Object_Manager[default=yes] enable threads enable thread support[default=yes] enable verb not sup enable verbose ENOTSUP reports[default=no] enable trace enable ACE tracing[default=no] enable xt reactor build support for the XtReactor[default=no] with x use the X Window System with gperf compile the gperf program[default=yes] with tli device[=DEV] device for TCP on TLI[default=/dev/tcp] To enable debugging and disable code for | example |
| do something like the the work being done by the ACE Configuration Project is being slowly introduced into the official ACE distribution Some of the functionality in the work created by the ACE Configuration Project has been removed so that ACE may be built in the usual fashion Once the ACE Configuration Project work stabilizes on more platforms that removed functionality may be added to ACE Currently the configure script contains most of the tests that are necessary to properly configure ACE on most platforms there are still some autoconf tests that are missing As you may encounter and most likely will have compilation problems Please report any problems to the contacts listed at the end of this document The configure script that is currently being used has been modified from the ACE Configuration Project s configure script to prevent makefiles from being automatically generated since there are still some issues that must be addressed before automatically generated makefiles are incorporated into the official ACE distribution A listing of available configure script options can be shown by silent do not print checking messages version print the version of autoconf that created configure Directory and file e g Sun C[default=no] enable enable code inlining[default=yes] enable log msg prop enable threads inheriting ACE_Log_Msg properties from parent thread[default=yes] enable logging enable ACE logging macros[default=yes] enable malloc stats enable malloc statistics collection[default=no] enable optimize enable additional optimizations[default=yes] enable probe enable ACE_Timeprobes[default=no] enable profile enable profiling[default=no] enable purify Purify all executables[default=no] enable quantify Quantify all executables[default=no] enable reentrant enable reentrant functions[default=yes] enable repo use GNU template repository GNU C with repo patches and EGCS only[default=no] enable rtti enable run time type identification *Currently only for Sun C[default=no] enable static obj mgr static enable Object_Manager[default=yes] enable threads enable thread support[default=yes] enable verb not sup enable verbose ENOTSUP reports[default=no] enable trace enable ACE tracing[default=no] enable xt reactor build support for the XtReactor[default=no] with x use the X Window System with gperf compile the gperf program[default=yes] with tli device[=DEV] device for TCP on TLI[default=/dev/tcp] To enable debugging and disable code for just enter the following on the command | line |
| * $Id |
| do something like the the work being done by the ACE Configuration Project is being slowly introduced into the official ACE distribution Some of the functionality in the work created by the ACE Configuration Project has been removed so that ACE may be built in the usual fashion Once the ACE Configuration Project work stabilizes on more platforms that removed functionality may be added to ACE Currently the configure script contains most of the tests that are necessary to properly configure ACE on most platforms there are still some autoconf tests that are missing As you may encounter and most likely will have compilation problems Please report any problems to the contacts listed at the end of this document The configure script that is currently being used has been modified from the ACE Configuration Project s configure script to prevent makefiles from being automatically generated since there are still some issues that must be addressed before automatically generated makefiles are incorporated into the official ACE distribution A listing of available configure script options can be shown by entering |
do something like the the work being done by the ACE Configuration Project is being slowly introduced into the official ACE distribution Some of the functionality in the work created by the ACE Configuration Project has been removed so that ACE may be built in the usual fashion Once the ACE Configuration Project work stabilizes on more platforms that removed functionality may be added to ACE Currently the configure script contains most of the tests that are necessary to properly configure ACE on most platforms there are still some autoconf tests that are missing As you may encounter and most likely will have compilation problems Please report any problems to the contacts listed at the end of this document The configure script that is currently being used has been modified from the ACE Configuration Project s configure script to prevent makefiles from being automatically generated since there are still some issues that must be addressed before automatically generated makefiles are incorporated into the official ACE distribution A listing of available configure script options can be shown by silent do not print checking messages version print the version of autoconf that created configure Directory and file e g Sun C [default=no] enable enable code inlining [default=yes] enable log msg prop enable threads inheriting ACE_Log_Msg properties from parent thread [default=yes] enable logging enable ACE logging macros [default=yes] enable malloc stats enable malloc statistics collection [default=no] enable optimize enable additional optimizations [default=yes] enable probe enable ACE_Timeprobes [default=no] enable profile enable profiling [default=no] enable purify Purify all executables [default=no] enable quantify Quantify all executables [default=no] enable reentrant enable reentrant functions [default=yes] enable repo use GNU template repository GNU C with repo patches and EGCS only [default=no] enable rtti enable run time type identification* Currently only for Sun C [default=no] enable static obj mgr static enable Object_Manager [default=yes] enable threads enable thread support [default=yes] enable verb not sup enable verbose ENOTSUP reports [default=no] enable trace enable ACE tracing [default=no] enable xt reactor build support for the XtReactor [default=no] with x use the X Window System with gperf compile the gperf program [default=yes] with tli device [=DEV] device for TCP on TLI [default=/dev/tcp] To enable debugging and disable code for example [static] |
| do something like the following |
| do something like the the work being done by the ACE Configuration Project is being slowly introduced into the official ACE distribution Some of the functionality in the work created by the ACE Configuration Project has been removed so that ACE may be built in the usual fashion Once the ACE Configuration Project work stabilizes on more platforms that removed functionality may be added to ACE Currently the configure script contains most of the tests that are necessary to properly configure ACE on most platforms However |
do something like the the work being done by the ACE Configuration Project is being slowly introduced into the official ACE distribution Some of the functionality in the work created by the ACE Configuration Project has been removed so that ACE may be built in the usual fashion Once the ACE Configuration Project work stabilizes on more platforms that removed functionality may be added to ACE Currently the configure script contains most of the tests that are necessary to properly configure ACE on most platforms there are still some autoconf tests that are missing As you may encounter and most likely will have compilation problems Please report any problems to the contacts listed at the end of this document The configure script that is currently being used has been modified from the ACE Configuration Project s configure script to prevent makefiles from being automatically generated since there are still some issues that must be addressed before automatically generated makefiles are incorporated into the official ACE distribution A listing of available configure script options can be shown by silent do not print checking messages version print the version of autoconf that created configure Directory and file e g Sun C [default=no] enable enable code inlining [default=yes] enable log msg prop enable threads inheriting ACE_Log_Msg properties from parent thread [default=yes] enable logging enable ACE logging macros [default=yes] enable malloc stats enable malloc statistics collection [default=no] enable optimize enable additional optimizations [default=yes] enable probe enable ACE_Timeprobes [default=no] enable profile enable profiling [default=no] enable purify Purify all executables [default=no] enable quantify Quantify all executables [default=no] enable reentrant enable reentrant functions [default=yes] enable repo use GNU template repository GNU C with repo patches and EGCS only [default=no] enable rtti enable run time type identification* Currently only for Sun C [default=no] enable static obj mgr static enable Object_Manager [default=yes] enable threads enable thread support [default=yes] enable verb not sup enable verbose ENOTSUP reports [default=no] enable trace enable ACE tracing [default=no] enable xt reactor build support for the XtReactor [default=no] with x use the X Window System with gperf compile the gperf program [default=yes] with tli device [=DEV] device for TCP on TLI [default=/dev/tcp] To enable debugging and disable code inlining [static] |
do something like the the work being done by the ACE Configuration Project is being slowly introduced into the official ACE distribution Some of the functionality in the work created by the ACE Configuration Project has been removed so that ACE may be built in the usual fashion Once the ACE Configuration Project work stabilizes on more platforms that removed functionality may be added to ACE Currently the configure script contains most of the tests that are necessary to properly configure ACE on most platforms there are still some autoconf tests that are missing As you may encounter and most likely will have compilation problems Please report any problems to the contacts listed at the end of this document The configure script that is currently being used has been modified from the ACE Configuration Project s configure script to prevent makefiles from being automatically generated since there are still some issues that must be addressed before automatically generated makefiles are incorporated into the official ACE distribution A listing of available configure script options can be shown by silent do not print checking messages version print the version of autoconf that created configure Directory and file e g Sun C [default=no] enable enable code inlining [default=yes] enable log msg prop enable threads inheriting ACE_Log_Msg properties from parent thread [default=yes] enable logging enable ACE logging macros [default=yes] enable malloc stats enable malloc statistics collection [default=no] enable optimize enable additional optimizations [default=yes] enable probe enable ACE_Timeprobes [default=no] enable profile enable profiling [default=no] enable purify Purify all executables [default=no] enable quantify Quantify all executables [default=no] enable reentrant enable reentrant functions [default=yes] enable repo use GNU template repository GNU C with repo patches and EGCS only [default=no] enable rtti enable run time type identification* Currently only for Sun C [default=no] enable static obj mgr static enable Object_Manager [default=yes] enable threads enable thread support [default=yes] enable verb not sup enable verbose ENOTSUP reports [default=no] enable trace enable ACE tracing [default=no] enable xt reactor build support for the XtReactor [default=no] with x use the X Window System with gperf compile the gperf program [default=yes] with tli device [=DEV] device for TCP on TLI [default=/dev/tcp] To enable debugging and disable code for just enter the following on the command line [static] |
| do something like the the work being done by the ACE Configuration Project is being slowly introduced into the official ACE distribution Some of the functionality in the work created by the ACE Configuration Project has been removed so that ACE may be built in the usual fashion Once the ACE Configuration Project work stabilizes on more platforms that removed functionality may be added to ACE Currently the configure script contains most of the tests that are necessary to properly configure ACE on most platforms there are still some autoconf tests that are missing As you may encounter and most likely will have compilation problems Please report any problems to the contacts listed at the end of this document The configure script that is currently being used has been modified from the ACE Configuration Project s configure script to prevent makefiles from being automatically generated since there are still some issues that must be addressed before automatically generated makefiles are incorporated into the official ACE distribution A listing of available configure script options can be shown by silent do not print checking messages version print the version of autoconf that created configure Directory and file names |
| do something like the the work being done by the ACE Configuration Project is being slowly introduced into the official ACE distribution Some of the functionality in the work created by the ACE Configuration Project has been removed so that ACE may be built in the usual fashion Once the ACE Configuration Project work stabilizes on more platforms that removed functionality may be added to ACE Currently the configure script contains most of the tests that are necessary to properly configure ACE on most platforms there are still some autoconf tests that are missing As such |
1.4.7-1