Keep constants and some routines common to both Output and Input CDR streams. More...

#include <CDR_Base.h>

Classes
struct	Double

struct	Float

struct	LongDouble

Public Types
enum	{ OCTET_SIZE = 1, SHORT_SIZE = 2, LONG_SIZE = 4, LONGLONG_SIZE = 8, LONGDOUBLE_SIZE = 16, OCTET_ALIGN = 1, SHORT_ALIGN = 2, LONG_ALIGN = 4, LONGLONG_ALIGN = 8, LONGDOUBLE_ALIGN = 8, MAX_ALIGNMENT = 8, DEFAULT_BUFSIZE = ACE_DEFAULT_CDR_BUFSIZE, EXP_GROWTH_MAX = ACE_DEFAULT_CDR_EXP_GROWTH_MAX, LINEAR_GROWTH_CHUNK = ACE_DEFAULT_CDR_LINEAR_GROWTH_CHUNK }

enum	Byte_Order { BYTE_ORDER_BIG_ENDIAN = 0, BYTE_ORDER_LITTLE_ENDIAN = 1, BYTE_ORDER_NATIVE = ACE_CDR_BYTE_ORDER }

Basic OMG IDL Types
These types are for use in the CDR classes. The cleanest way to avoid complaints from all compilers is to define them all.
typedef bool	Boolean

typedef unsigned char	Octet

typedef char	Char

typedef ACE_WCHAR_T	WChar

typedef ACE_INT16	Short

typedef ACE_UINT16	UShort

typedef ACE_INT32	Long

typedef ACE_UINT32	ULong

typedef ACE_UINT64	ULongLong

typedef long long	LongLong

Static Public Member Functions
static void	swap_2 (char const orig, char target)

static void	swap_4 (char const orig, char target)

static void	swap_8 (char const orig, char target)

static void	swap_16 (char const orig, char target)

static void	swap_2_array (char const orig, char target, size_t length)

static void	swap_4_array (char const orig, char target, size_t length)

static void	swap_8_array (char const orig, char target, size_t length)

static void	swap_16_array (char const orig, char target, size_t length)

static void	mb_align (ACE_Message_Block *mb)

static size_t	first_size (size_t minsize)

static size_t	next_size (size_t minsize)

static int	grow (ACE_Message_Block *mb, size_t minsize)

static int	consolidate (ACE_Message_Block dst, const ACE_Message_Block src)

static size_t	total_length (const ACE_Message_Block begin, const ACE_Message_Block end)

Detailed Description

Keep constants and some routines common to both Output and Input CDR streams.

Member Typedef Documentation

typedef bool ACE_CDR::Boolean

typedef char ACE_CDR::Char

typedef ACE_INT32 ACE_CDR::Long

typedef long long ACE_CDR::LongLong

typedef unsigned char ACE_CDR::Octet

typedef ACE_INT16 ACE_CDR::Short

typedef ACE_UINT32 ACE_CDR::ULong

typedef ACE_UINT64 ACE_CDR::ULongLong

typedef ACE_UINT16 ACE_CDR::UShort

typedef ACE_WCHAR_T ACE_CDR::WChar

Member Enumeration Documentation

anonymous enum

Enumerator:

OCTET_SIZE
SHORT_SIZE
LONG_SIZE
LONGLONG_SIZE
LONGDOUBLE_SIZE
OCTET_ALIGN
SHORT_ALIGN
LONG_ALIGN
LONGLONG_ALIGN
LONGDOUBLE_ALIGN	Note the CORBA LongDouble alignment requirements do not match its size...
MAX_ALIGNMENT	Maximal CDR 1.1 alignment: "quad precision" FP (i.e. "CDR::Long double", size as above).
DEFAULT_BUFSIZE	The default buffer size. Todo: We want to add options to control this default value, so this constant should be read as the default default value ;-)
EXP_GROWTH_MAX	The buffer size grows exponentially until it reaches this size; afterwards it grows linearly using the next constant
LINEAR_GROWTH_CHUNK	Once exponential growth is ruled out the buffer size increases in chunks of this size, note that this constants have the same value right now, but it does not need to be so.

enum ACE_CDR::Byte_Order

Defines values for the byte_order argument to ACE_OutputCDR and ACE_InputCDR.

Enumerator:

BYTE_ORDER_BIG_ENDIAN	Use big-endian order (also known as network byte order).
BYTE_ORDER_LITTLE_ENDIAN	Use little-endian order.
BYTE_ORDER_NATIVE	Use whichever byte order is native to this machine.

Member Function Documentation

int ACE_CDR::consolidate	(	ACE_Message_Block *	dst,
		const ACE_Message_Block *	src
	)

static

Copy a message block chain into a single message block, preserving the alignment of the first message block of the original stream, not the following message blocks.

Return values

-1	Failure
0	Success.

size_t ACE_CDR::first_size ( size_t minsize )

inlinestatic

Compute the size of the smallest buffer that can contain at least minsize bytes. To understand how a "best fit" is computed look at the algorithm in the code. Basically the buffers grow exponentially, up to a certain point, then the buffer size grows linearly. The advantage of this algorithm is that is rapidly grows to a large value, but does not explode at the end.

int ACE_CDR::grow	(	ACE_Message_Block *	mb,
		size_t	minsize
	)

static

Increase the capacity of mb to contain at least minsize bytes. If minsize is zero the size is increased by an amount at least large enough to contain any of the basic IDL types.

Return values

-1	Failure
0	Success.

void ACE_CDR::mb_align ( ACE_Message_Block * mb )

static

Align the message block to ACE_CDR::MAX_ALIGNMENT, set by the CORBA spec at 8 bytes.

size_t ACE_CDR::next_size ( size_t minsize )

inlinestatic

Compute not the smallest, but the second smallest buffer that will fir minsize bytes.

void ACE_CDR::swap_16	(	char const *	orig,
		char *	target
	)

inlinestatic

void ACE_CDR::swap_16_array	(	char const *	orig,
		char *	target,
		size_t	length
	)

static

void ACE_CDR::swap_2	(	char const *	orig,
		char *	target
	)

inlinestatic

Do byte swapping for each basic IDL type size. There exist only routines to put byte, halfword (2 bytes), word (4 bytes), doubleword (8 bytes) and quadword (16 byte); because those are the IDL basic type sizes.

void ACE_CDR::swap_2_array	(	char const *	orig,
		char *	target,
		size_t	length
	)

static

void ACE_CDR::swap_4	(	char const *	orig,
		char *	target
	)

inlinestatic

void ACE_CDR::swap_4_array	(	char const *	orig,
		char *	target,
		size_t	length
	)

static

void ACE_CDR::swap_8	(	char const *	orig,
		char *	target
	)

inlinestatic

void ACE_CDR::swap_8_array	(	char const *	orig,
		char *	target,
		size_t	length
	)

static

size_t ACE_CDR::total_length	(	const ACE_Message_Block *	begin,
		const ACE_Message_Block *	end
	)

static

The documentation for this class was generated from the following files:

Classes

Public Types

Static Public Member Functions

Detailed Description

Member Typedef Documentation

Member Enumeration Documentation

Member Function Documentation