Operations on "timeval" structures, which express time in seconds (secs) and microseconds (usecs). More...

#include <Time_Value.h>

Collaboration diagram for ACE_Time_Value:

Public Member Functions
	ACE_Time_Value (void)
	Default Constructor.
	ACE_Time_Value (time_t sec, suseconds_t usec=0)
	Constructor.
	ACE_Time_Value (const struct timeval &t)
	Construct the ACE_Time_Value from a timeval.
	ACE_Time_Value (const timespec_t &t)
	Construct the ACE_Time_Value object from a timespec_t.
	ACE_Time_Value (const FILETIME &ft)
	Construct the ACE_Time_Value object from a Win32 FILETIME.
void	set (time_t sec, suseconds_t usec)
	Initializes the ACE_Time_Value from seconds and useconds.
void	set (double d)
void	set (const timeval &t)
	Initializes the ACE_Time_Value from a timeval.
void	set (const timespec_t &t)
	Initializes the ACE_Time_Value object from a timespec_t.
void	set (const FILETIME &ft)
	Initializes the ACE_Time_Value object from a Win32 FILETIME.
unsigned long	msec (void) const
	Converts from ACE_Time_Value format into milliseconds format.
ACE_UINT64	get_msec () const
	Converts from ACE_Time_Value format into milliseconds format.
void	msec (ACE_UINT64 &ms) const
	Converts from ACE_Time_Value format into milliseconds format.
void	msec (ACE_UINT64 &ms)
	Converts from ACE_Time_Value format into milliseconds format.
void	set_msec (const ACE_UINT64 &ms)
	Converts from milli-seconds format into ACE_Time_Value format.
void	msec (long)
	Converts from milli-seconds format into ACE_Time_Value format.
void	msec (int)
	Converts from milli-seconds format into ACE_Time_Value format.
	operator timespec_t () const
	Returns the value of the object as a timespec_t.
	operator timeval () const
	Returns the value of the object as a timeval.
	operator const timeval * () const
	Returns a pointer to the object as a timeval.
	operator FILETIME () const
	Returns the value of the object as a Win32 FILETIME.
time_t	sec (void) const
	Get seconds.
void	sec (time_t sec)
	Set seconds.
suseconds_t	usec (void) const
	Get microseconds.
void	usec (suseconds_t usec)
	Set microseconds.
void	to_usec (ACE_UINT64 &usec) const
ACE_Time_Value &	operator+= (const ACE_Time_Value &tv)
	Add tv to this.
ACE_Time_Value &	operator+= (time_t tv)
	Add tv to this.
ACE_Time_Value &	operator= (const ACE_Time_Value &tv)
	Assign @ tv to this.
ACE_Time_Value &	operator= (time_t tv)
	Assign @ tv to this.
ACE_Time_Value &	operator-= (const ACE_Time_Value &tv)
	Subtract tv to this.
ACE_Time_Value &	operator-= (time_t tv)
	Subtract tv to this.
ACE_Time_Value &	operator*= (double d)
	Multiply the time value by the d factor.
ACE_Time_Value	operator++ (int)
	Increment microseconds as postfix.
ACE_Time_Value &	operator++ (void)
	Increment microseconds as prefix.
ACE_Time_Value	operator-- (int)
	Decrement microseconds as postfix.
ACE_Time_Value &	operator-- (void)
	Decrement microseconds as prefix.
void	dump (void) const
	Dump is a no-op.
Static Public Attributes
static const ACE_Time_Value	zero
	Constant "0".
static const ACE_Time_Value	max_time
static const DWORDLONG	FILETIME_to_timval_skew
	Const time difference between FILETIME and POSIX time.
Private Member Functions
void	normalize (bool saturate=false)
	Put the timevalue into a canonical form.
Private Attributes
timeval	tv_
	Store the values as a timeval.
Friends
ACE_Time_Value	operator+ (const ACE_Time_Value &tv1, const ACE_Time_Value &tv2)
	Adds two ACE_Time_Value objects together, returns the sum.
ACE_Time_Value	operator- (const ACE_Time_Value &tv1, const ACE_Time_Value &tv2)
	Subtracts two ACE_Time_Value objects, returns the difference.
bool	operator< (const ACE_Time_Value &tv1, const ACE_Time_Value &tv2)
	True if tv1 < tv2.
bool	operator> (const ACE_Time_Value &tv1, const ACE_Time_Value &tv2)
	True if tv1 > tv2.
bool	operator<= (const ACE_Time_Value &tv1, const ACE_Time_Value &tv2)
	True if tv1 <= tv2.
bool	operator>= (const ACE_Time_Value &tv1, const ACE_Time_Value &tv2)
	True if tv1 >= tv2.
bool	operator== (const ACE_Time_Value &tv1, const ACE_Time_Value &tv2)
	True if tv1 == tv2.
bool	operator!= (const ACE_Time_Value &tv1, const ACE_Time_Value &tv2)
	True if tv1 != tv2.

ACE_Time_Value	operator* (double d, const ACE_Time_Value &tv)
	Multiplies the time value by d.
ACE_Time_Value	operator* (const ACE_Time_Value &tv, double d)
	Multiplies the time value by d.

Detailed Description

Operations on "timeval" structures, which express time in seconds (secs) and microseconds (usecs).

This class centralizes all the time related processing in ACE. These time values are typically used in conjunction with OS mechanisms like <select>, <poll>, or <cond_timedwait>.

Constructor & Destructor Documentation

ACE_Time_Value::ACE_Time_Value ( void ) [inline]

Default Constructor.

ACE_Time_Value::ACE_Time_Value	(	time_t	sec,
		suseconds_t	usec = `0`
	)		`[inline, explicit]`

Constructor.

ACE_Time_Value::ACE_Time_Value ( const struct timeval & t ) [inline, explicit]

Construct the ACE_Time_Value from a timeval.

ACE_Time_Value::ACE_Time_Value ( const timespec_t & t ) [inline, explicit]

Construct the ACE_Time_Value object from a timespec_t.

Initializes the ACE_Time_Value object from a timespec_t.

ACE_Time_Value::ACE_Time_Value ( const FILETIME & ft ) [explicit]

Construct the ACE_Time_Value object from a Win32 FILETIME.

Initializes the ACE_Time_Value object from a Win32 FILETIME.

Member Function Documentation

void ACE_Time_Value::dump ( void ) const

Dump is a no-op.

The dump() method is a no-op. It's here for backwards compatibility only, but does not dump anything. Invoking logging methods here violates layering restrictions in ACE because this class is part of the OS layer and ACE_Log_Msg is at a higher level.

ACE_UINT64 ACE_Time_Value::get_msec ( ) const [inline]

Converts from ACE_Time_Value format into milliseconds format.

Returns:: Sum of second field (in milliseconds) and microsecond field (in milliseconds).

Note:: The semantics of this method differs from the sec() and usec() methods. There is no analogous "millisecond" component in an ACE_Time_Value.

void ACE_Time_Value::msec ( ACE_UINT64 & ms ) const [inline]

Converts from ACE_Time_Value format into milliseconds format.

Returns:: Sum of second field (in milliseconds) and microsecond field (in milliseconds) and return them via the

Parameters:

ms	parameter.

Note:: The semantics of this method differs from the sec() and usec() methods. There is no analogous "millisecond" component in an ACE_Time_Value.

Deprecated:: Use get_msec() instead.

void ACE_Time_Value::msec ( ACE_UINT64 & ms ) [inline]

Converts from ACE_Time_Value format into milliseconds format.

Returns:: Sum of second field (in milliseconds) and microsecond field (in milliseconds) and return them via the

Parameters:

ms	parameter.

Note:: The semantics of this method differs from the sec() and usec() methods. There is no analogous "millisecond" component in an ACE_Time_Value.

Deprecated:: Use get_msec() instead.

void ACE_Time_Value::msec ( long milliseconds ) [inline]

Converts from milli-seconds format into ACE_Time_Value format.

Converts from milli-seconds format into Time_Value format.

Note:: The semantics of this method differs from the sec() and usec() methods. There is no analogous "millisecond" component in an ACE_Time_Value.

unsigned long ACE_Time_Value::msec ( void ) const [inline]

Converts from ACE_Time_Value format into milliseconds format.

Converts from Time_Value format into milli-seconds format.

Returns:: Sum of second field (in milliseconds) and microsecond field (in milliseconds). Note that this method can overflow if the second and microsecond field values are large, so use the msec (ACE_UINT64 &ms) method instead.

Note:: The semantics of this method differs from the sec() and usec() methods. There is no analogous "millisecond" component in an ACE_Time_Value.

void ACE_Time_Value::msec ( int milliseconds ) [inline]

Converts from milli-seconds format into ACE_Time_Value format.

Converts from milli-seconds format into Time_Value format.

Note:: The semantics of this method differs from the sec() and usec() methods. There is no analogous "millisecond" component in an ACE_Time_Value.

void ACE_Time_Value::normalize ( bool saturate = false ) [private]

Put the timevalue into a canonical form.

Todo:: This loop needs some optimization.

Todo:: This loop needs some optimization.

ACE_Time_Value::operator const timeval * ( ) const [inline]

Returns a pointer to the object as a timeval.

ACE_Time_Value::operator FILETIME ( ) const

Returns the value of the object as a Win32 FILETIME.

ACE_Time_Value::operator timespec_t ( ) const [inline]

Returns the value of the object as a timespec_t.

ACE_Time_Value::operator timeval ( ) const [inline]

Returns the value of the object as a timeval.

ACE_Time_Value & ACE_Time_Value::operator*= ( double d )

Multiply the time value by the d factor.

Note:: The result of the operator is valid for results from range < (ACE_INT32_MIN, -999999), (ACE_INT32_MAX, 999999) >. Result outside this range are saturated to a limit.

ACE_Time_Value & ACE_Time_Value::operator++ ( void )

Increment microseconds as prefix.

Note:: The only reason this is here is to allow the use of ACE_Atomic_Op with ACE_Time_Value.

ACE_Time_Value ACE_Time_Value::operator++ ( int )

Increment microseconds as postfix.

Note:: The only reason this is here is to allow the use of ACE_Atomic_Op with ACE_Time_Value.

Increment microseconds (the only reason this is here is to allow the use of ACE_Atomic_Op with ACE_Time_Value).

ACE_Time_Value & ACE_Time_Value::operator+= ( const ACE_Time_Value & tv ) [inline]

Add tv to this.

Add TV to this.

ACE_Time_Value & ACE_Time_Value::operator+= ( time_t tv ) [inline]

Add tv to this.

ACE_Time_Value ACE_Time_Value::operator-- ( int )

Decrement microseconds as postfix.

Note:: The only reason this is here is to allow the use of ACE_Atomic_Op with ACE_Time_Value.

Decrement microseconds (the only reason this is here is / to allow the use of ACE_Atomic_Op with ACE_Time_Value).

ACE_Time_Value & ACE_Time_Value::operator-- ( void )

Decrement microseconds as prefix.

Note:: The only reason this is here is to allow the use of ACE_Atomic_Op with ACE_Time_Value.

ACE_Time_Value & ACE_Time_Value::operator-= ( const ACE_Time_Value & tv ) [inline]

Subtract tv to this.

Subtract TV to this.

ACE_Time_Value & ACE_Time_Value::operator-= ( time_t tv ) [inline]

Subtract tv to this.

ACE_Time_Value & ACE_Time_Value::operator= ( const ACE_Time_Value & tv ) [inline]

Assign @ tv to this.

ACE_Time_Value & ACE_Time_Value::operator= ( time_t tv ) [inline]

Assign @ tv to this.

time_t ACE_Time_Value::sec ( void ) const [inline]

Get seconds.

Returns number of seconds.

Returns:: The second field/component of this ACE_Time_Value.

Note:: The semantics of this method differs from the msec() method.

void ACE_Time_Value::sec ( time_t sec ) [inline]

Set seconds.

Sets the number of seconds.

void ACE_Time_Value::set ( double d ) [inline]

Initializes the ACE_Time_Value from a double, which is assumed to be in second format, with any remainder treated as microseconds.

void ACE_Time_Value::set	(	time_t	sec,
		suseconds_t	usec
	)		`[inline]`

Initializes the ACE_Time_Value from seconds and useconds.

void ACE_Time_Value::set ( const timespec_t & tv ) [inline]

Initializes the ACE_Time_Value object from a timespec_t.

Initializes a timespec_t. Note that this approach loses precision since it converts the nano-seconds into micro-seconds. But then again, do any real systems have nano-second timer precision?!

void ACE_Time_Value::set ( const FILETIME & ft )

Initializes the ACE_Time_Value object from a Win32 FILETIME.

void ACE_Time_Value::set ( const timeval & t ) [inline]

Initializes the ACE_Time_Value from a timeval.

void ACE_Time_Value::set_msec ( const ACE_UINT64 & ms ) [inline]

Converts from milli-seconds format into ACE_Time_Value format.

Note:: The semantics of this method differs from the sec() and usec() methods. There is no analogous "millisecond" component in an ACE_Time_Value.

void ACE_Time_Value::to_usec ( ACE_UINT64 & usec ) const [inline]

Returns:: Sum of second field (in microseconds) and microsecond field and return them via the

Parameters:

usec	parameter.

suseconds_t ACE_Time_Value::usec ( void ) const [inline]

Get microseconds.

Returns number of micro-seconds.

Returns:: The microsecond field/component of this ACE_Time_Value.

Note:: The semantics of this method differs from the msec() method.

void ACE_Time_Value::usec ( suseconds_t usec ) [inline]

Set microseconds.

Sets the number of micro-seconds.

Friends And Related Function Documentation

bool operator!=	(	const ACE_Time_Value &	tv1,
		const ACE_Time_Value &	tv2
	)		`[friend]`

True if tv1 != tv2.

ACE_Time_Value operator*	(	double	d,
		const ACE_Time_Value &	tv
	)		`[friend]`

Multiplies the time value by d.

ACE_Time_Value operator*	(	const ACE_Time_Value &	tv,
		double	d
	)		`[friend]`

Multiplies the time value by d.

ACE_Time_Value operator+	(	const ACE_Time_Value &	tv1,
		const ACE_Time_Value &	tv2
	)		`[friend]`

Adds two ACE_Time_Value objects together, returns the sum.

ACE_Time_Value operator-	(	const ACE_Time_Value &	tv1,
		const ACE_Time_Value &	tv2
	)		`[friend]`

Subtracts two ACE_Time_Value objects, returns the difference.

bool operator<	(	const ACE_Time_Value &	tv1,
		const ACE_Time_Value &	tv2
	)		`[friend]`

True if tv1 < tv2.

bool operator<=	(	const ACE_Time_Value &	tv1,
		const ACE_Time_Value &	tv2
	)		`[friend]`

True if tv1 <= tv2.

bool operator==	(	const ACE_Time_Value &	tv1,
		const ACE_Time_Value &	tv2
	)		`[friend]`

True if tv1 == tv2.

bool operator>	(	const ACE_Time_Value &	tv1,
		const ACE_Time_Value &	tv2
	)		`[friend]`

True if tv1 > tv2.

bool operator>=	(	const ACE_Time_Value &	tv1,
		const ACE_Time_Value &	tv2
	)		`[friend]`

True if tv1 >= tv2.

Member Data Documentation

const DWORDLONG ACE_Time_Value::FILETIME_to_timval_skew [static]

Initial value:

ACE_INT64_LITERAL (0x19db1ded53e8000)

Const time difference between FILETIME and POSIX time.

Static constant to remove time skew between FILETIME and POSIX time. POSIX and Win32 use different epochs (Jan. 1, 1970 v.s. Jan. 1, 1601). The following constant defines the difference in 100ns ticks.

In the beginning (Jan. 1, 1601), there was no time and no computer. And Bill said: "Let there be time," and there was time....

const ACE_Time_Value ACE_Time_Value::max_time [static]

Constant for maximum time representable. Note that this time is not intended for use with <select> or other calls that may have *their own* implementation-specific maximum time representations. Its primary use is in time computations such as those used by the dynamic subpriority strategies in the ACE_Dynamic_Message_Queue class.

Constant for maximum time representable. Note that this time is not intended for use with select () or other calls that may have *their own* implementation-specific maximum time representations. Its primary use is in time computations such as those used by the dynamic subpriority strategies in the ACE_Dynamic_Message_Queue class. Note: this object requires static construction.

timeval ACE_Time_Value::tv_ [private]

Store the values as a timeval.

const ACE_Time_Value ACE_Time_Value::zero [static]

Constant "0".

Static constant representing `zero-time'. Note: this object requires static construction.

The documentation for this class was generated from the following files:

Public Member Functions

Static Public Attributes

Private Member Functions

Private Attributes

Friends

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Friends And Related Function Documentation

Member Data Documentation