%% bare_jrnl.tex
%% V1.1
%% 2002/08/13
%% by Michael Shell
%% mshell@ece.gatech.edu
%%
%% NOTE: This text file uses MS Windows line feed conventions. When (human)
%% reading this file on other platforms, you may have to use a text
%% editor that can handle lines terminated by the MS Windows line feed
%% characters (0x0D 0x0A).
%%
%% This is a skeleton file demonstrating the use of IEEEtran.cls
%% (requires IEEEtran.cls version 1.6 or later) with an IEEE journal paper.
%%
%% Support sites:
%% http://www.ieee.org
%% and/or
%% http://www.ctan.org/tex-archive/macros/latex/contrib/supported/IEEEtran/
%%
%% This code is offered as-is - no warranty - user assumes all risk.
%% Free to use, distribute and modify.

% *** Authors should verify (and, if needed, correct) their LaTeX system  ***
% *** with the testflow diagnostic prior to trusting their LaTeX platform ***
% *** with production work. IEEE's font choices can trigger bugs that do  ***
% *** not appear when using other class files.                            ***
% Testflow can be obtained at:
% http://www.ctan.org/tex-archive/macros/latex/contrib/supported/IEEEtran/testflow


% Note that the a4paper option is mainly intended so that authors in
% countries using A4 can easily print to A4 and see how their papers will
% look in print. Authors are encouraged to use U.S. letter paper when 
% submitting to IEEE. Use the testflow package mentioned above to verify
% correct handling of both paper sizes by the author's LaTeX system.
%
% Also note that the "draftcls", not "draft", option should be used if
% it is desired that the figures are to be displayed in draft mode.

\documentclass[12pt,letterpaper,draftcls,onecolumn]{IEEEtran}
%\documentclass[journal]{IEEEtran}
% If the IEEEtran.cls has not been installed into the LaTeX system files,
% manually specify the path to it:
% \documentclass[journal]{../sty/IEEEtran}
  

% some very useful LaTeX packages include:

\usepackage{bm}
\usepackage{capt-of}

%\usepackage{cite}      % Written by Donald Arseneau
                        % V1.6 and later of IEEEtran pre-defines the format
                        % of the cite.sty package \cite{} output to follow
                        % that of IEEE. Loading the cite package will
                        % result in citation numbers being automatically
                        % sorted and properly "ranged". i.e.,
                        % [1], [9], [2], [7], [5], [6]
                        % (without using cite.sty)
                        % will become:
                        % [1], [2], [5]--[7], [9] (using cite.sty)
                        % cite.sty's \cite will automatically add leading
                        % space, if needed. Use cite.sty's noadjust option
                        % (cite.sty V3.8 and later) if you want to turn this
                        % off. cite.sty is already installed on most LaTeX
                        % systems. The latest version can be obtained at:
                        % http://www.ctan.org/tex-archive/macros/latex/contrib/supported/cite/

\usepackage{graphicx}  % Written by David Carlisle and Sebastian Rahtz
                        % Required if you want graphics, photos, etc.
                        % graphicx.sty is already installed on most LaTeX
                        % systems. The latest version and documentation can
                        % be obtained at:
                        % http://www.ctan.org/tex-archive/macros/latex/required/graphics/
                        % Another good source of documentation is "Using
                        % Imported Graphics in LaTeX2e" by Keith Reckdahl
                        % which can be found as esplatex.ps and epslatex.pdf
                        % at: http://www.ctan.org/tex-archive/info/
\usepackage{epsfig}

%\usepackage{psfrag}    % Written by Craig Barratt, Michael C. Grant,
                        % and David Carlisle
                        % This package allows you to substitute LaTeX
                        % commands for text in imported EPS graphic files.
                        % In this way, LaTeX symbols can be placed into
                        % graphics that have been generated by other
                        % applications. You must use latex->dvips->ps2pdf
                        % workflow (not direct pdf output from pdflatex) if
                        % you wish to use this capability because it works
                        % via some PostScript tricks. Alternatively, the
                        % graphics could be processed as separate files via
                        % psfrag and dvips, then converted to PDF for
                        % inclusion in the main file which uses pdflatex.
                        % Docs are in "The PSfrag System" by Michael C. Grant
                        % and David Carlisle. There is also some information 
                        % about using psfrag in "Using Imported Graphics in
                        % LaTeX2e" by Keith Reckdahl which documents the
                        % graphicx package (see above). The psfrag package
                        % and documentation can be obtained at:
                        % http://www.ctan.org/tex-archive/macros/latex/contrib/supported/psfrag/

%\usepackage{subfigure} % Written by Steven Douglas Cochran
                        % This package makes it easy to put subfigures
                        % in your figures. i.e. "figure 1a and 1b"
                        % Docs are in "Using Imported Graphics in LaTeX2e"
                        % by Keith Reckdahl which also documents the graphicx
                        % package (see above). subfigure.sty is already
                        % installed on most LaTeX systems. The latest version
                        % and documentation can be obtained at:
                        % http://www.ctan.org/tex-archive/macros/latex/contrib/supported/subfigure/

\usepackage{colortbl}

\usepackage{url}       % Written by Donald Arseneau
                        % Provides better support for handling and breaking
                        % URLs. url.sty is already installed on most LaTeX
                        % systems. The latest version can be obtained at:
                        % http://www.ctan.org/tex-archive/macros/latex/contrib/other/misc/
                        % Read the url.sty source comments for usage information.

%\usepackage{stfloats}  % Written by Sigitas Tolusis
                        % Gives LaTeX2e the ability to do double column
                        % floats at the bottom of the page as well as the top.
                        % (e.g., "\begin{figure*}[!b]" is not normally
                        % possible in LaTeX2e). This is an invasive package
                        % which rewrites many portions of the LaTeX2e output
                        % routines. It may not work with other packages that
                        % modify the LaTeX2e output routine and/or with other
                        % versions of LaTeX. The latest version and
                        % documentation can be obtained at:
                        % http://www.ctan.org/tex-archive/macros/latex/contrib/supported/sttools/
                        % Documentation is contained in the stfloats.sty
                        % comments as well as in the presfull.pdf file.
                        % Do not use the stfloats baselinefloat ability as
                        % IEEE does not allow \baselineskip to stretch.
                        % Authors submitting work to the IEEE should note
                        % that IEEE rarely uses double column equations and
                        % that authors should try to avoid such use.
                        % Do not be tempted to use the cuted.sty or
                        % midfloat.sty package (by the same author) as IEEE
                        % does not format its papers in such ways.

\usepackage{amsmath}   % From the American Mathematical Society
                        % A popular package that provides many helpful commands
                        % for dealing with mathematics. Note that the AMSmath
                        % package sets \interdisplaylinepenalty to 10000 thus
                        % preventing page breaks from occurring within multiline
                        % equations. Use:
%\interdisplaylinepenalty=2500
                        % after loading amsmath to restore such page breaks
                        % as IEEEtran.cls normally does. amsmath.sty is already
                        % installed on most LaTeX systems. The latest version
                        % and documentation can be obtained at:
                        % http://www.ctan.org/tex-archive/macros/latex/required/amslatex/math/



% Other popular packages for formatting tables and equations include:

% Frank Mittelbach's and David Carlisle's array.sty which improves the
% LaTeX2e array and tabular environments to provide better appearances and
% additional user controls. Array.sty is already installed on most systems.
% The latest version and documentation can be obtained at:
% http://www.ctan.org/tex-archive/macros/latex/required/tools/

% Mark Wooding's extremely powerful MDW tools, especially mdwmath.sty and
% mdwtab.sty which are used to format equations and tables, respectively.
% The MDWtools set is already installed on most LaTeX systems. The lastest
% version and documentation is available at:
% http://www.ctan.org/tex-archive/macros/latex/contrib/supported/mdwtools/

% V1.6 of IEEEtran contains the IEEEeqnarray family of commands that can
% be used to generate multiline equations as well as matrices, tables, etc.


% Also of notable interest:

% Scott Pakin's eqparbox package for creating (automatically sized) equal
% width boxes. Available:
% http://www.ctan.org/tex-archive/macros/latex/contrib/supported/eqparbox/

% *** Do not adjust lengths that control margins, column widths, etc. ***
% *** Do not use packages that alter fonts (such as pslatex).         ***
% There should be no need to do such things with IEEEtran.cls V1.6 and later.


% correct bad hyphenation here
\hyphenation{op-tical net-works semi-conduc-tor}

% minimize spacing between tables and figures as much as possible
\setlength{\floatsep}{3ex}
\setlength{\intextsep}{3ex}
\setlength{\textfloatsep}{3ex}

\begin{document}
%
% paper title
\title{\Large\bf Reliable Effects Screening: \\A Distributed Continuous Quality
Assurance Process for Monitoring Performance Degradation in Evolving
Software Systems}

%
%
% author names and IEEE memberships
% note positions of commas and nonbreaking spaces ( ~ ) LaTeX will not break
% a structure at a ~ so this keeps an author's name from being broken across
% two lines.
% use \thanks{} to gain access to the first footnote area
% a separate \thanks must be used for each paragraph as LaTeX2e's \thanks
% was not built to handle multiple paragraphs
    
\author{Cemal Yilmaz$^\star$$^*$\thanks{* Cemal Yilmaz was a graduate
  student at the University of Maryland, College Park, when this work
  was carried out.}, Adam Porter$^\dagger$, Arvind S. Krishna$^\ddagger$, 
Atif Memon$^\dagger$, Douglas C. Schmidt$^\ddagger$, Aniruddha Gokhale$^\ddagger$, 
Balachandran Natarajan$^\ddagger$\\
$^\star$ IBM T. J. Watson Research Center, Hawthorne, NY, 10532\\
$^\dagger$ Dept. of Computer Science, University of Maryland, College Park, MD 20742\\
$^\ddagger$ Dept. of Electrical Engineering and Computer Science, Vanderbilt University, Nashville, TN 37235}

 
% note the % following the last \IEEEmembership and also the first \thanks - 
% these prevent an unwanted space from occurring between the last author name
% and the end of the author line. i.e., if you had this:
% 
% \author{....lastname \thanks{...} \thanks{...} }
%                     ^------------^------------^----Do not want these spaces!
%
% a space would be appended to the last name and could cause every name on that
% line to be shifted left slightly. This is one of those "LaTeX things". For
% instance, "A\textbf{} \textbf{}B" will typeset as "A B" not "AB". If you want
% "AB" then you have to do: "A\textbf{}\textbf{}B"
% \thanks is no different in this regard, so shield the last } of each \thanks
% that ends a line with a % and do not let a space in before the next \thanks.
% Spaces after \IEEEmembership other than the last one are OK (and needed) as
% you are supposed to have spaces between the names. For what it is worth,
% this is a minor point as most people would not even notice if the said evil
% space somehow managed to creep in.
%
% The paper headers
\markboth{IEEE Transactions on Software Engineering}{Shell \MakeLowercase{\textit{et al.}}: Bare Demo of IEEEtran.cls for Journals}
% The only time the second header will appear is for the odd numbered pages
% after the title page when using the twoside option.


% If you want to put a publisher's ID mark on the page
% (can leave text blank if you just want to see how the
% text height on the first page will be reduced by IEEE)
%\pubid{0000--0000/00\$00.00~\copyright~2002 IEEE}

% use only for invited papers
%\specialpapernotice{(Invited Paper)}

% make the title area
\maketitle

\def\ie{{\it i.e.}}

\def\eg{{\it e.g.}}

\def\etal{{\it et al.}}



\subsection*{Abstract}  
{
  \input{abstract}
}
 
\begin{keywords}
Distributed continuous quality assurance, performance-o\-ri\-ented regression testing, design-of-experiments theory
\end{keywords}

\input {introduction}
\input{skoll_summary}
\input{new_mes}
\input{experiments_new}
\input{guidelines}
\input{related_new}
\input {conclusions}   


\bibliographystyle{./IEEEtranS}
\bibliography{./sigproc}

\input {doeAppendix}

\end{document}



% LocalWords:  cyilmaz aporter al IEEEtran cls IEEEabrv
